DAYE Special Synthetic Fiber
The performance of UHPC POM crude fiber comprehensively exceeds the national standard requirements.
0
Item | Monofilament (Diameter ≧ 100μm) |
UHPC Special Synthetic Fiber | |
Relative density（g/cm3） | 1.41 |
glass transition temperatureTg（℃） | -30 |
melting pointTm（℃） | 165 |
thermal deformation temperature under load(℃) | 105 |
Operating temperature（℃） | -45～95 |
diameter（μm） | 100-300 |
tensile strength（MPa） | 967-1175 |
initial modulus（GPa） | 8.5-10 |
Elongation at break（％） | 12-18 |
Alkali resistance（％） | 99 |
Fiber Specifications (Length: mm) | 2-20 |
Dosing(Volume Ratio) | 1%-3% |
Dosing（kg/m3） | 14.2-42.6 |
After adding UHPC Special Synthetic fiber products, UHPC parts can achieve the following effects
Lightweight
UHPC Special Synthetic fiber density 1.41;
steel fiber density 7.8
toughened
Reduce the occurrence of matrix brittle failure without warning
Durable and rust free
UHPC Special Synthetic fiber is naturally alkali resistant
Fill evenly and densely
Very good dispersibility: UHPC Special Synthetic fibers have higher stiffness and dispersibility, and lower air entrainment than other types of fibers.
Safe to use
It can be directly touched, and the product has no danger of exposed fibers
